home *** CD-ROM | disk | FTP | other *** search
- Path: news.netspace.net.au!usenet
- From: astroboy@netspace.net.au (Paul Dossett)
- Newsgroups: comp.sys.amiga.cd32
- Subject: Re: 1200-CD32 (SX) Sernet diagram help
- Date: 17 Feb 1996 09:30:46 GMT
- Organization: NetSpace Online Systems
- Message-ID: <1116.6621T1002T970@netspace.net.au>
- References: <4fcuq2$khl@bignews.shef.ac.uk> <901.6617T54T1741@sheppnews.com.au>
- NNTP-Posting-Host: dialup-a2-17.mel.netspace.net.au
- X-Newsreader: THOR 2.22 (Amiga;TCP/IP) *UNREGISTERED*
-
- Ben Anderson (shepssc@sheppnews.com.au) said:
-
- >All you need is a null-modem cable. You can actually buy a ready made cable
- >cheaper than you can buy the parts for so go down and grab yourself a 25 - 9
- >pin null-modem cable from your favourite computer store. You can make one
- >simply by connecting three pins together (I think it is 2-2, 3-3 and 7-7 but
- >I can't check it right now because my reference book has gone walkies). Just
- >reply to me if you need to confirm these.
-
- Pins 2 and 3 must be swapped over of course, otherwise you'll be trying to
- transmit on the same wire as the other machine!
-
- >P.P.S. Standard disclaimer... I don't take responsibility for fried surface-
- >mounted CIA's (or anything else for that matter!). 'nuff said.
-
- Then you shouldn't have mentioned pins at all.. do like me and plead ignorance
- unless there's a tech. manual in front of you.. :)
-
- --
- Paul Dossett | Yamaha, Epiphone, Pearl, Paiste | Amiga 2000/040/21/365/3.1 __
- -------------| RASTER Bubble Bobble betatester | Amiga CD32/020/2/CD/3.1__///
- boo! : astroboy@netspace.net.au.. | '76 Toyota Corolla 1.2 \XX/
-
-